L-shape Corner Base Unit
1200mm x 1200mm
|Worktop Length||1200mm each way|
|Carcass Length||1175mm each way from corner|
This is an example of how we build L-shape sections to enable you to construct corner sections in your kitchen.
The example shown comes 1200mm out each way from the corner and is constructed of a 1075mm base unit (leaving a 100mm gap between the end of the unit and the wall) with one blank end which screws to a 575mm base unit to form the corner. There is 25mm overhang over each end of the worktop.
The price includes the worktop which comes stuck in the L-shape.
If you want a different size L-shape then please let us know and we can let you know what it would cost.
There is one fixed shelf in the cupboard with the blank and the storage space is accessed through the full height door. The 600mm base unit has one drawer over one door with one fixed shelf in the lower part of the cupboard.
The 50 mm void behind the back boards allows room for most pipes as well as providing ample opportunity to scribe the unit in if your walls are out of square. The drawer is made with dovetail joints and runs on traditional wooden runners. The doors are fitted with strong magnetic catches.
The worktop comes with a rounded edge along the front and sides as well as the front corners being rounded, it will also come with a 40mm upstand to be fixed to the back of the worktop which provides a good starting point for tiling. The upstand can be supplied fitted if requested. The worktop is treated with Osmo wood protector and has 4 coats of clear Osmo oil applied, this provides long lasting protection and waterproofing, we will provide you with maintenance advice when you collect your furniture. The example shown has an oak worktop.
This unit can also be supplied without the worktop, please see the drop down menu for prices. If you choose this option then we take no responsibility for any damage which may occur during the fitting of the worktop or as a result of the worktop you have fitted.